FLYTRON - STROBON CREE - Green
by Flytron

Strobon Cree® Standalone is the brightest navigation strobe solution for enclosed drones like DJI Phantom, DJI Inspire, 3DR Solo, Walkera and others. 

No cabling required. Just attact it to your drone or model airplane with your favorite glue or velcro, press the button to turn it ON. That's all. 

Features

• 2+ hours continuous operation with onboard battery.
• Powerful Cree® Standalone LED
• No Cabling required
• Easy to use single button interface.
• On board battery status and charge indicator system.
• Compatible with all 5V MicroUSB cables and chargers.(cable not included)
• Contact Pads(L+ and L-) for the external LED support.
• Battery with internal overcharge and discharge protection 

Colour Selection 

Because of human eye's limitations, Every colour has different visibility and energy transfer rate.
Also every LED colour has different chemical compounds and effciency.
According our experience in years;
 
WHITE :  The best visibility and efficienty. 
RED     :  2th in the visibility, efficiency is same as white but the best for warning. 
GREEN :  3th in the visibility and  efficiency.  Best for Standard RED/GREEN (Left/Right) navigation usage.
BLUE    : 4th in visibility and also efficiency.  We are not suggesting this colour for warning or navigation but special usage. 

Bottom line: White and Red is the best option if you need long range visible strobes. And you can use the green to identify your flying platform direction. Blue is only for special applications. 

Usage

• BATTERY STATUS: Press the button then release to learn battery status when it is OFF.
  (1 blink:Need Charge, 2 blink: It's OK, 3 blink: Fully Charged)
• ON/OFF: Press and hold the button for 3 seconds to turn ON or OFF
• CHARGE: Plug it to any micro USB charger or computer port when charging required.
  - The LED will blink with very short bursts when charging.
  - The LED will blink with 1 second ON / 2 seconds OFF pattern when the battery is fully charged. 
  It takes 2 hours for empty batteries.

Notice:The battery includes it's own PCM module. This module protects the battery from overcharge and discharge for long lifespan. If there is no life sign on the circuit when you press the button, probably discharge protection has activated because of low battery voltage. Just charge it to turn-on.

Specifications  

• Dimensions: 20mm x 16mm x 8mm
• Weight: 4gr
• Current Consumption: <30mA per hour
• Charge Port: MicroUSB
• Charge Current: 40mA max.
• Charge Time: ~2 hours
• Battery Type: 70mA LiPo Battery with safe and reliable PCM circuit.