RMRC Parallel Charging Board - 35A XT-60 Package
by RMRC

We need to sell our old T-connector (Deans compatible) parallel boards! This package comes with the following adapters to "modernize" it:

• 4x Female T-connector to XT60 adapters
• 1x Female Banana to XT60 adapter (To work with ISDT style chargers)

Introducing the ReadyMadeRC Parallel Charging Board! 

The RMRC ParaBoard is designed to be used in conjunction with a balance charger to simultaneously charge multiple lithium batteries in parallel. Using this method, you can significantly reduce the time required for charging multiple battery packs. 

If your charger is capable of supplying enough charge current, you can charge 4 batteries in the time it would normally take to charge each battery individually. This means you can spend 1/4 as much time charging and more time flying!

The ParaBoard is made of high quality components. The PCB is made of two ounce copper and the main power circuit is heavily tinned to allow the use of high current. The boards have been individually tested under 25A continuous current, and they are safe to be loaded at 35A for shorter periods of time (10 Minutes Max)

Features:

• Charges up to 4 packs in parallel
• Expandable for more boards via the "Export" ports
• Housing Material: ABS Fireproof Material

Specifications:

• Balance Tap: JST-XH
• ​Cell Count: 2-6s
• Fuse: 40A (4 fuses)
• Size: 152x76x17.5mm
• Maximum continuous current: 25A 
• Maximum current for short term: 35A (10 Minutes Max)

NOTE: Please follow all precautions included in manual before using this board for parallel charging. Not following these directions may result in fire and damages. Ready Made RC, LLC is not responsible for damaged batteries or property. 

• Batteries should ALWAYS be the same cell count
• Batteries should ALWAYS have nearly the same voltage before charging 
• Never leave your charger unattended
• Keep away from flammable materials
• Always connect balance taps before main power plugs when connecting to the board.