Now includes the original 1280MHz, along with the new 1258MHz frequencies! Must be used with a compatible receiver to be able to use the 1258 frequency (available here).
A high quality, low weight, high powered transmitter in the 1.3GHz frequency range.
Highly integrated circuit / High power output (output power will drop as input voltage drops).
High Reliability/Linearity/AlGaAs/GaAs FET power amplifier module built-in
Using digital phase-Lock-Loop circuit without drifting problem under high temperature
2 channels DIP switch selectable
Output Power: 1000mW (see above)
Nominal output impedance: 50 ohms
Operating voltage: 10.5-13V DC
Supply current: 500mA (maximum)
Sub carrier frequency: 5.5MHz
Dimension: 45 x 28 x 9mm
Weight (transmitter only): 22g
Includes:
Transmitter
A/V Power Cable
Antenna
Standard SMA connector
Cable available for easy connection to OSD's and other devices here!
Systems sold in US will have 1258MHz and 1280MHz only.
THIS IS THE US VERSION, ANYONE OUTSIDE THE US SHOULD PURCAHSE THE INTERNATIONAL VERSION THAT IS UNLOCKED, OTHERWISE WE WILL SHIP WHAT YOU ORDER!
***Use the bottom port on the vtx to link your vtx cable. The top port isn't used at this point.
The button on top will change channels between frequencies.
Frequencies:
CH9:1280MHZ
CHd:1258MHZ
The wiring from the vtx is:
Yellow = Video
Red = +12V
White = Audio
Black = Ground
Name | Value |
---|---|
MANUFACTURER | RMRC |
BAND | 1.3GHz |
US Customers:
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
International Customers:
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.