Pan/Tilt Basic Kit
by RMRC

This is a stand alone pan/tilt FPV module without the gearbox included in the full Pan/Tilt module kits.

The kits are supplied with quality 9g servos.  For better resistance to crash damage, and for better tolerance of 900MHz video systems, HS-65HB servos are available as an upgrade option below.

Note: careful routing of camera wiring is required to prevent binding.

The assembly can be attached directly to the ReadyMadeRC pods, or directly to the plane of your choice. 

Comes with a mounting plate that will fit many popular FPV cameras including:

    RMRC-420, RMRC-420XV, RMRC-520, RMRC-LL600, KX131, KX171, KX191, IF Cam, SN777, SN555 and others

Additional back plates may be purchased here to fit RMRC-480, RMRC-540, IF OSD Cam, DPC OSD Cam, DX201

If you need to mount a camera not listed, please send me a message via the "Contact Us" link to the left.

Please select below which type of camera you will be using so I can include the proper back plate for it.

Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft.  If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required.  Send me an e-mail, I have some inverted mounts available.

This kit includes:

• Laser cut components and required hardware for pan/tilt module.
• Two 9g Servos

Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for TG9e/HS-65HB servos.

You'll need to supply:

• Double sided servo tape to retain camera and tilt servo.
• Pull-ties to hold your wiring down.
• Medium CA

Manual: Basic Pan/Tilt