STRIX McTwist NoctuaGlow LED Package: Choose Your Colors
by STRIX

STRIX McTwist NoctuaGlow Wing LED Kit

This kit is enough to light up one STRIX Mctwist with our NoctuaGlow COB leds. These come pre-seoldered with a JST connector and designed to plug into the extra power tap on the stock ESC. Just plug them in, glue them on, and light up the sky!

Specifications:

• Voltage: 12V 3s LiPo (We have used these on 4s with no issues, but may reduce overall life)
• Width: 2.7mm
• Length: Covers tail, and top/bottom of wings as shown in the pictures. 
• Technology: Chip-On-Board (COB)
• Durability: Weather-resistant (They have taken a beating on the nose of our McTwist and are still glowing bright!)
• Customizable: Cut and solder every 25mm. Cut lines are under the adhesive backing. 

Includes: 

• 2x STRIX McTwist Wing Noctua LEDs with pre-soldered JST plug.
• 1x STRIX McTwist Tail Noctua LEDs with pre-soldered JST plug.
• 1x JST Y Adapter 

Notes:

• While these are adhesive-backed, we highly recommend using Foam-Tac or similar contact adhesive to glue to foam. 
• In order to solder additional sections (not required), you will need to peel back the adhesive on the contact pads.
• Use the product photos in order to see how we like to glue our LEDs to the McTwist. Feel free to change it up! 

They're bright enough to see during the day! Check out the video below.