Matek CANPDB w/ 4A BEC & GH Splitter
by Matek Systems

Simple to use CAN Bus splitter and PDB for Matek sensors. 

Specifications

    6V to 55V Operating Input Range(2S-12S Li-xx)
    5.2V output on “5V” pin/pads
    Support total 4A Continuous load current. 1A for each JST-GH port
    Maximum Duty Cycle: 100%,   when input voltage< setting value,  Regulator output voltage = Input voltage
    No protection for reversed input polarity
    Output Short-circuit tolerant (3 seconds)
    5x CAN-H/CAN-L are in parallel
    CAN port connector: JST-GH 4pin(SM04B-GHS-TB)
    Size & Weight: 38 x 26 x 7.8mm, 12g
    Packing: 1x CANPDB-4A,   1x JST-GH-4P to JST-GH-4P 20cm silicon wire