Eagle Eyes FPV Station with Plastic Case
by Eagle Tree

Our new EagleEyes^TM FPV Station provides all of the following features:

* Receiver Diversity - when you connect two NTSC or PAL audio/video receivers to it (of any frequency), the EagleEyes^TM picks the better signal at any given time, which can greatly reduce video fades and improve your FPV experience! A variety of diversity settings are configurable with the on-board switches and LED indicators.
* Antenna Tracking - when coupled with the Eagle Tree Vector, the EagleEyes^TM is the heart of a full-featured pan/tilt antenna tracker. Powerful, easy to use menus are provided for adjusting the EagleEyes^TM to work flawlessly with the tracker of your choice. ReadyMadeRC.com produces a low cost, high quality tracker. The built-in regulator drives even large pan/tilt servos, with no need for an external BEC.
* Telemetry - When coupled with Eagle Tree Vector, all Eagle Tree data (not just GPS position) is transmitted to your laptop, via your video transmitter and the EagleEyes^TM USB port (separate USB cable required). Your flight can then be graphed and displayed with our powerful software, or visualized (either in real time or after your flight) with Google Earth!
* Four Channel A/V Distribution - Ever wish you had more video/audio outputs? The EagleEyes^TM has four built-in outputs!
* Programmable Low Voltage Alarm - How is your ground station battery doing? Now you can program a low voltage alarm buzzer, which alerts you when your battery is below your chosen voltage. The buzzer can also be programmed to alert for other conditions, such as poor telemetry signal.

Here are the specifications:

* Two video inputs -NTSC/PAL, using your video receivers of any frequency. Video Input 2 is adjustable to match Video Input 1.
* Two audio inputs - Two monaural audio inputs are supported. Audio Input 2 is adjustable to match Audio Input 1.
* Four A/V outputs - Four video outputs (75 ohm) and four "line level" audio outputs
* Power Input - Power input range approximately 6V to 14V. Barrel style power input with standard 2.1mm center pin.
* Two Servo Outputs for pan and tilt trackers - Unit is capabable of delivering 5A burst output to drive even large pan/tilt servos.
* USB Port for connecting to PC, for live PC display of telemetry and firmware update. Note: A standard USB "Mini-B" cable required for these features, but not included.
* Encasement -  In a heavy duty clear case.

Here is a video demonstration of the tracking function of the EagleEyes FPV Station, with the ReadyMadeRC.com pan/tilt tracker.