RMRC Recruit Stealth Black EPP Wing V2 PNP Stabilized FPV Ready
by RMRC

Are you new to flying wings? Are you a seasoned pilot who just needs something that is fun to fly, simple to put together, and can take a beating right out the box? The RMRC Recruit is your aircraft! This is the absolute best fpv plane for those just getting started with flying, or those moving from multirotor to fixed wing.

Includes installed and configured stabilizer for auto-launch and stabilized flight. Great for beginners and those who want to smooth out their flying!

It assembles in seconds and best of all, with ZERO glue required. Simply plug in your receiver to the pre-installed gyro that is already tuned to give you the best flight experience possible. The durable Black EPP foam is crash proven by best of the "Dumb Thumb Crew" at RMRC. 

If you are a multirotor pilot who is getting started on the other side of the hobby, you are sure to recognize the 2206 2300kv motor. We have also made sure that the multirotor popular HD camera, the GoPro Session, fits perfectly into the nose. The power button is also easy to press right through the foam.

If you like to travel with your planes, in addition to the removable wings, the Recruit's winglets are dismantled with only 2 screws!

What's new with the Recruit V2?

• Bigger Motor! - The Recruit has gone from a 2204 2300kv motor up to a 2206 2300kv and to a 3 blade propeller.
• Optional wood winglets provide more durability and the option to paint them to your color scheme. (Foam winglets are still included)
• Skid protector - We added a plastic fuselage protector to help keep you recruit looking new after several landings. 
• Reinforced wing joiners - You told us, and we listened! The Recruit V2 features extra wood panels in the wings to help reinforce the connecting area between the fuselage and wings for added durability. 
• Stronger Elevons - We added a carbon fiber strip to the elevons to help keep your control surfaces flat under hard turns. 
• Smaller Box - Every square inch of the packaging was squeezed out to give you better shipping rates!

Features

• Durable EPP foam
• Tuned gyro with 2 flight modes: 3D and Stabilized
• Multirotor style, 2206 motor
• Nose mounting options for HD cameras
• Side mount position for FPV camera
• Easy to remove wings and winglets

Specifications

• Wingspan: 900mm
• Length: 482mm
• Foam: EPP
• Motor: 2206 2300kv
• Propeller: 3 Blade 5x4.5
• ESC: 3s-4s 30A with 5v/3A BEC, XT60
• HD Camera Options: 
  • GoPro Session 4/5
  • Runcam HD 1/2/3
  • Yi-Cam
  • GoPro Hero 4 (5 can fit with modification)
  • Foxeer Legend

Note: If using without an HD camera we do not recommend flipping the wood tray. This part is glued in well at this time and damage may occur to the plate. The best method for attaching the battery is a larger piece of hook-n-loop on the plate and attach the battery to that only.

Includes

• Recruit PNP
• Installed stabilizer
• Installed ESC, Motor, Servos
• Wood and foam winglets
• Propeller

Needed to Complete

• Simple assembly
• 4 Channel Transmitter/ with standard PWM Receiver (also accepts PPM or SBUS, but with AETR mapping. PWM is recommended since SBUS and PPM do not send a proper throttle signal when in failsafe mode)
• FPV Gear (Optional)
• 3s 2200-2400mAH Battery with XT60

Gyro Settings

• There is no need to set up your radio with wing mixing. The gyro does this automatically.
• Solid Blue LED: Full stabilized/Takeoff mode
• Flashing Red LED: Stabilizer off (Not available on RTF Radio)
• Solid Red LED: Acro Mode (Allows loops and rolls, but stabilized)
• Note: If you need to switch back into Full stabilized/Takeoff mode, please do so at less than 10% throttle. Otherwise, the gyro will lift the elevons as if it were taking off again.